Can-Am Maverick X3 Rear Skid Plate Kit
Can-Am Maverick X3 Rear Skid Plate Kit.
Fits: 64″ or 72″ wide, 2 and 4 seat “Max” models
Factory UTV’s UHMW Skid Plates are the gold standard for UTV protection systems. OEM skid plates simply do not satisfactorily protect the underside of your UTV under normal off road operation. The Can Am X3 OEM protection falls seriously short in a couple areas. Can Am uses HMW which has 1/10th the impact strength compared to the UHMW used for Factory UTV’s Armor. This is an important distinction on a machine as big and fast as the X3. The X3’s Clutch Cover is extremely vulnerable to damage from below with the OEM protection. Our Rear Skid Armor addresses the clutch cover vulnerability with coverage that extends out and around the cover to protect it from below. The X3 Rear Skid Kit comes standard with an X-Brace under the engine/trans area of the X3. The X-Brace consists of a 1/8″ 6061 High Strength Aluminum sheet that gets sandwiched between the UHMW skid and X3 Frame during installation. If your going to play hard in your X3, you’ll need the added X-Brace protection. The X3 engine/trans is precariously close to the skid plate on an X3. The X3 Rear Skid Kit replaces the OEM rear portion of the skid plate and works with the stock front skid in place. These are the same X3 UHMW Armor products you’ll see on the Can Am X3’s of top Can Am factory racers like Kyle Chaney, Marc Burnett and Monster Matt Burroughs to name just a few. They depend on Factory UTV UHMW Armor to get them to the finish line under the most demanding of race conditions. Join the #futvarmy and protect your X3 with the best Armor in the world, Factory UTV UHMW Armor!
UHMW (Ultra-High Molecular Weight) plastic. Significantly lighter than aluminum, FUTV skids and A-Arm guards offer full protection for the undercarriage of your UTV. UHMW is tough, wear resistant plastic that combines an incredibly low coefficient of friction with outstanding impact strength, and will outwear carbon steel 10 to 1. Unlike aluminum, UHMW also has memory, meaning after a big impact hits aluminum will bend ,gouge and break while UHMW maintains it’s original shape. These are the same protection products used to help racers win just about every major Pro UTV off road race including multiple King of Hammers, multiple UTV World Championships , multiple Mint 400’s, multiple 5 Silver State 300’s, multiple Baja 500’s and Baja 500’s, and multiple GNCC races and championships. These skid plates are very TOUGH! Protect your investment today!
UTV Guide Video Featuring Driver John Duckworth with our X3 skid plate in action
Check out this UTV Guide’s X3 XRC Build Build Break down
6061st aluminum X brace reinforcement plate,
Reinforces rear skid plate to limit impact flexing in vital areas.
What is UHMW ?
UHMW means: Ultra High Molecular Weight, Ultimately it’s a density measurement. During its manufacturing process, the molecules of this plastic is compacted as densely and close together as possible. UHMW is roughly 100x times denser than HMW, and exponentially denser than ABS or other common plastics. Our UHMW is partially made from Recycled UHMW materials, making the constancy more rigid and impact absorbent then that of just fresh new plastic, allowing the perfect amount of limited flexing capability needed to endure impacts. Our UHMW has a very low Friction coefficient, meaning its very slippery in rough conditions, up there with Teflon and other abrasion resistant materials, but it has the impact resistance and density to back it up and withstand some of the harshest environments you can throw at it.
Using materials Lab tested and engineered to be the best for this application, paired with our engineers methodically designing the most secure mounting possible for just about every major UTV model. Our production team heat forming and hand finishing each product before it goes out, all our products being constructed in House and Made in the USA. Proving its durability through real world race hardened product testing with our FUTV army sponsorship program and affiliates, helping support racers and teams putting our skid plates through the ultimate test. resulting in the top 5 winning positions of almost every major yearly UTV, ultra 4 and off-road event.
If it’s ½” inch or 3/8” inch thick, our UHMW skid Plates have what it takes to help protect your ride through just about anything.