Crow RZR RS1 Restraints with Sewn-in Padded Shoulder Straps
Crow RZR RS1 Restraints with Sewn-in Padded Shoulder Straps. Crow 4 point 2 inch restraint Sewn in Padded Shoulder and Sternum Straps to help keep you secured in your RS1. The Standard Latch & Link has 3-1/2″ of webbing sewn between the Latch & Link and the adjusters. Individual Harnesses reach a maximum of 52’’and a minimum of 26’’ end to end. Lap belt must be anchored to the frame rail or roll cage as close to the hip as possible at an angle of 45 degrees, but no greater than 60 degrees to the ground. Mounting brackets should be installed at an angle that is compatible with the direction of pull on the webbing under full load. Preferred mount is in a double shear with allowance for the bolt-in bracket to pivot and align toward the direction of the load UTV RESTRAINTS NOT for persons under 70 lbs. 3” 4-Way Seat Belt Bolt In with Individual Harness Wrap Around, Pull Down Adjustment, (Not For Competition Use)
Pair this with any of our harness bar mounts for a complete restraint system.
Safety is always the main goal and greatest concern when it comes to any power sports related fun. We recommend that restraints should be the very first purchase and/or modification of any new UTV Enthusiast. Protect your passengers, Protect yourself. These 4 point (and with the 5th point sub belt add on), keep you and passangers securely in your seats. In the event of a roll over, they keep you / passangers in place, kept from dangerously thrashing around inside your roll cage or even tossed out of your vehicle.
This is the very last thing and one of the worst case scenarios you can encounter with any motorsport activity, this is why we fully and 100% recommend the use of restraints with your UTV.
